M-audio Session with Fast Track USB Bedienungsanleitung PDF herunterladen (Seite 8)

Session with Fast Track USB User Guide

The Fast Track USB Audio Interface

Front Panel Controls

1 Input Level – Adjusts the gain level for the rear-panel XLR input (14).

2. Peak LED – Indicates presence of peak input level from the XLR input. Lights

when input signal approaches –3dB before overload.

3. Signal LED – Indicates presence of input signal from the XLR input. Lights

when input signal level approaches –40dB.

4. Input/Playback Mix Control – Controls the ratio of input signal to playback

signal from your recording software. (When you record, you should mute the

track you’re recording. Otherwise, you’ll hear the analog input signal AND

latency delayed recorded signal.)

5. Mono Switch – When pressed, this switch sums the input signals to mono for

direct monitoring.

6. Headphone Output – Standard 1/8” stereo headphone output.

7. Output Level – Adjusts overall output volume level. This control affects both the

rear panel RCA outputs (11) and the headphone output (6).

8. Power LED – Lights when the unit is powered on.

Rear Panel Controls

9. Kensington Lock Connector – Connect a standard laptop-style cable locking

device here to protect your Fast Track USB from theft or accidental breakage.

10. USB Connector – Connect the included USB cable here, and connect the

other end to your computer’s USB port.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Keine Kommentare

M-audio Session with Fast Track USB Bedienungsanleitung Seite 8