M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Bedienungsanleitung PDF herunterladen (Seite 11)

Hardware options for Pro Tools LE and M-Powered systems

asecond after you let go of the fader – then it will revert to showing the pan

value.

Display Scribble Strips and Display Mode Switch

To the right of the Channel Scribble Strips, two more ‘scribble strips’ show

additional information – the Display Scribble Strips.

For example, if you have any stereo tracks in your Pro Tools Session, the

Channel Scribble strips will default to displaying the pan values for the left

channels. To view and be able to modify the right channel pan settings, you

have to press the button marked ‘L R Meter’ located to the right of the encoder

displays. Three associated LEDs indicate whether you have selected the left or

right channels for panning, or the left or right Meter. This information is also

shown in the Display Scribble Strips.

By default, the Display Scribble Strips always show the current status of the

Channel Scribble Strips. So, for example, if you hit the Insert View button, it will

say which insert you are viewing, such as Insert A.

If you press the Command switch at the same time as the Display Mode switch,

the channels will display numerical parameter values rather than control

names. For example, in Pan view, when you press Command + Display, fader

volume levels in dB are shown as the default display.

You can also show the Pro Tools main Counter in the Display Scribble Strips by

pressing the Display Mode switch, which is located right between the Display

Scribble Strips and the Channel Scribble Strips. So you can see the Bar:Beat

location or the SMPTE location or whatever the main Counter is set to.

More Buttons and Status Indicators

There are various LEDs and buttons located below the Display Scribble Strips.

Four LEDs indicate the sampling rate: 44.1, 48, 88.2, or 96 kHz.

Three buttons underneath these let you select Enter, Undo, and the Standalone

mode.

Three more LEDs to the right of these indicate MIDI input and output activity.

To the left you will  nd the Record Enable button. When this is pressed you can

arm any track for record by pressing its Channel Select button on the Digi 002.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 52 53

Keine Kommentare

M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Bedienungsanleitung Seite 11