M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Bedienungsanleitung PDF herunterladen (Seite 15)

Hardware options for Pro Tools LE and M-Powered systems

When you press the Pan/Send switch, Digi 002 identi es channels with sends

assigned to them by illuminating their Channel Select switches. If no sends are

present, no Channel Select switches will be lit. If you do have any sends in your

Pro Tools Session, you can access the controls for any of these by pressing the

corresponding illuminated Channel Select switch.

Channel Scribble Strip 1 and the  rst rotary encoder show track pan position

for that track. (If the track is a stereo track, you can toggle between left and

right pan by pressing the Encoder Mode switch immediately to the right of the

encoders. This switch is marked ‘L R Meter’ on the Digi 002.)

Channel Scribble Strips 3–7 show the names and their rotary encoders control

the levels for all  ve sends on that track. (Channel Scribble Strip 2 is inactive.)

In this mode, the Channel Select switches on channels 3–7 toggle pre- and

post-fader metering for the corresponding send.

Multi-mono Plug-ins

When working with a multi-mono plug-in, you can toggle the view between

the left and right sides of the plug-in by holding down the Display switch

when you press the Channel Select switch to select a plug-in from Channel

view. The resulting display shows ‘left’ and ‘right’ in the Scribble Strips, allowing

you to choose between the two sides of the multi-mono plug-in by pressing

the corresponding Channel Select switch.

Lower Section

The lower section contains the faders along with the transport and navigation

controls.

Figure A4.7

Digi 002 lower section.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 52 53

Keine Kommentare

M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Bedienungsanleitung Seite 15