M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Bedienungsanleitung PDF herunterladen (Seite 11)

A –10 dBV, “Alternative Main” unbalanced output pair that mirrors the Main (1–2)

Outputs can be used to provide a direct connection to –10 dBV devices such as

consumer-quality cassette players or to a consumer hi-fi amplifier or powered speakers if

you don’t have professional monitoring equipment.

At the lower left-hand side, you will find a pair of optical connectors for eight channels

of ADAT I/O or two channels of Optical S/PDIF I/O; a pair of RCA connectors for two

channels of S/PDIF digital I/O; and two FireWire ports—one to connect to your

computer and one to let you daisy-chain other FireWire devices such as digital cameras

or camcorders.

To the left of these, there is a footswitch jack that you can use to punch-in and -out of

record, and to the right, there are three five-pin DIN MIDI sockets: one MIDI In, and two

MIDI Outs allowing for 16 channels of MIDI input and 32 channels of MIDI output.

Finally, the power connector will accept AC supplies between 100 and 240 V running at

either 50 or 60 Hz—so you can connect the Digi 002 to the main electricity supplies in

most countries around the world without problems.

The Control Surface

The Digi 002 control surface is divided into two main sections with the input gain and

output level controls at the top and the other controls placed below.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 70 71

Keine Kommentare

M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Bedienungsanleitung Seite 11