M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Bedienungsanleitung PDF herunterladen (Seite 12)

The main section is further subdivided to group the control knobs, more switches and the

“scribble strip” displays in the middle section with the moving faders below these in the

lowest section, and the transport controls to the right of these.

*insert FigAD_4_Digi002ControlSurface.tif*

Figure D.4 Digi 002 Control Surface (No Longer Manufactured).

Top Section

Let’s look at the top section first. At the top left, there are four rotary gain controls for the

four microphone preamplifiers. Above these rotary gain controls, there are four pairs of

buttons. The first of each pair switches the input between microphone and line level. The

second button switches in a high-pass filter. This filter removes the lower frequencies that

may contain rumble or other unwanted sounds.

*insert FigAD_5-Digi002TopSection.png*

Figure D.5 Digi 002 Top Section.

To the right of these switches, there are two small button switches. The first of these

routes the Alternative Source to input pair 7–8. The second routes the Alternative Source

to the monitor outputs. An associated rotary control knob lets you adjust the output level

to the monitors, and adjacent to this knob, a button switch is provided to let you mute the

monitors. There is also a Mono button that can be very useful when checking audio that

will be broadcast (which may be in mono).

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 70 71

Keine Kommentare

M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Bedienungsanleitung Seite 12