M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Bedienungsanleitung PDF herunterladen (Seite 21)

bands, can be controlled using the Channel Select switches below the corresponding

Scribble Strips. Again, if you have more than one Dynamics plug-in inserted on a track,

you can get to the second by holding the Dynamics button and pressing the track’s

Channel Select button.

Inserts

When you press the Inserts switch, the Channel Scribble Strips will show abbreviated

names for any inserts on the track, and the Channel Select buttons will light up on any

channels that have a plug-in (or any hardware I/O) inserted so that you can identify these.

You should check the Display Scribble Strips at this point to see which of the five insert

slots you are viewing in the Channel Scribble Strips. These are labeled A to F, and you

can select which to view using the Insert/Send Position Selectors at the middle left of the

control surface.

You can choose which insert to edit by viewing each of the five insert slots in turn, until

you find the insert you are looking for, and then pressing the corresponding illuminated

Channel Select button.

When you press the Pan/Send switch, Digi 002 identifies channels with sends assigned to

them by illuminating their Channel Select switches. If no sends are present, no Channel

Select switches will be lit. If you do have any sends in your Pro Tools Session, you can

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 70 71

Keine Kommentare

M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Bedienungsanleitung Seite 21