M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Bedienungsanleitung PDF herunterladen (Seite 42)

standard MIDI interface. In this mode, the unit displays “Working” in the top row of the

LCD.

On Windows, ASIO- and WaveDriver-compatible applications are supported.

WaveDriver supports playback only. On Mac, CoreAudio Driver applications are

supported.

Utility Mode

003 is in this mode when the Utility switch is enabled (flashing). In Utility mode, you can

run preprogrammed diagnostic tests of the 003 unit (such as fader movement and LEDs).

The Utility switch is unavailable in Pro Tools mode.

Rear Panel

*insert FigAD_15_Digi003RearPanel.tif*

Figure D.15 Digi 003 Rear Panel.

The first four input channels located on the rear panel each have an XLR connector for a

microphone together with a 1/4-in. jack for use as a line-level input. Each of these

channels has a 75-Hz, high-pass filter (HPF), switchable per channel, and 48-V phantom

power is provided for the mic inputs, switchable in channel pairs.

There is an Alternate Source input for external device monitoring, and two stereo

outputs—a studio monitor output and an alternate control room output.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 70 71

Keine Kommentare

M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Bedienungsanleitung Seite 42